PROCESS EQUIPMENT DATABASE
ROTATING EQUIPMENTCLOUD DEDICATED COST DATABASE FOR COST ESTIMATING TEAMS
CAF-CAPEX DATABASE is a structured and comprehensive knowledge base designed to Cost Estimating professionals, the estimators can choose from parametric equipment models to detailed unit-rate data for all typical project disciplines, which include other parameters like Installation Mhrs and weights.
With the central database architecture of CAF-CORPORATION, client knowledge remains secure and available when they need it, and options for customized databases are available as per client request.
The CAF-CAPEX DATABASE information has been previously benchmarked with other third parties Databases, for example, some well-known datasets such as Compass International, Richardson and Page & Nations. In that benchmarking process, CAF-CORPORATION has applied the International statistic standards to obtain trusted data based on regression analysis methodology which include the feature to be real time updated using an owned Cost Index Database (CAF-COST INDEX DATABASE).
This Database was designed to perform Rotating Equipment Cost Estimates, based on generic cost curves for several equipment families types generated using benchmarking techniques. The benchmarked curves give Purchased Equipment Cost as a function of a capacity variable or combination of variables. The cost curves and other information contained in this application can be used to develop the overall process plant capital cost.
Available Database Families
- A1100 – PORTABLE AGITATORS
- A1200 – GEARMOTOR MIXERS FOR TANKS
- A1300 – HIGH SPEED DISPERSION MIXERS
- A1400 – LIQUID POLYMER BLENDER
- A1500 – CHEMICAL MIXER/FEEDER PACKAGED UNITS
- A1600 – HOMOGENIZER-MIXERS
B1100 – DYNAMIC COMPRESSORS
- B1110 – CENTRIFUGAL AIR COMPRESSOR WITH MOTOR
- B1120 – CENTRIFUGAL AIR COMPRESSOR WITH TURBINE
- B1130 – AXIAL (IN LINE) COMPRESSOR
B1200 – POSITIVE DISPLACEMENT COMPRESSORS
- B1210 – SINGLE RECIPROCATING AIR COMPRESSOR – SINGLE STAGE
- B1220 – SINGLE RECIPROCATING AIR COMPRESSOR – TWO STAGES
- B1230 – GAS ENGINE DRIVEN RECIPROCATING COMPRESSOR
- B1240 – ROTARY SCREW AIR COMPRESSORS
- B1250 – BREATHABLE AIR RECIPROCATING COMPRESSORS
B1300 – PULSATION DAMPENERS AND AIR DRYERS
- B1310 – AIR RECEIVERS/GAS PULSATION DAMPENERS
- B1320 – REFRIGERATED AIR DRYERS
- B1330 – CHILLER AIR DRYERS
- B1340 – AIR DRYERS, DESICCANT TYPE
- B1350 – AIR DRYER PRE-FILTERS, AFTER FILTERS AND AUTOMATIC DRAIN VALVES
B1400 – FANS AND BLOWERS
- B1410 – INDUSTRIAL AXIAL FANS
- B1420 – INDUSTRIAL CENTRIFUGAL FANS
- B1430 – POSITIVE DISPLACEMENT AIR BLOWERS
C1100 – ELECTRICAL MOTORS
- C1110 – ELECTRIC MOTOR DRIVERS UP TO 300 HP
- C1120 – ELECTRIC MOTOR DRIVERS > 300 HP UP TO 1000 HP
- C1130 – ELECTRIC MOTOR DRIVERS > 1000 HP UP TO 3500 HP
C1200 – GEARING PRODUCTS
- C1210 – CONCENTRIC SHAFT SPEED REDUCERS
- C1220 – HORIZONTAL GEARMOTORS
C1300 – TURBINES
- C1310 – STEAM TURBINES CONDENSING POWER OUTPUT: 10 UP TO 30.000 HP
- C1320 – STEAM TURBINES NON-CONDENSING POWER OUTPUT: 10 UP TO 30.000 HP
- C1330 – GAS TURBINES POWER OUTPUT: 1,000 – 370,000 HP
- C1340 – TURBO-EXPANDER
- C1350 – WIND TURBINES
- C1360 – WATER TURBINES
F1100 – CENTRIFUGAL PUMPS
F1100 – HORIZONTAL CENTRIFUGAL PUMPS
- F1101 – SINGLE STAGE STANDARD ANSI PUMP – HORIZONTAL OR VERTICAL END SUCTION
- F1102 – TWO STAGE, HORIZONTAL SPLIT CASE CENTRIFUGAL PUMPS
- F1103 – PLASTIC ANSI SINGLE STAGE PUMP
- F1104 – GENERAL SERVICE, CAST IRON FOR FLOWS TO 2000 GPM [125 L/S]
- F1105 – LOW CONSISTENCY PULP STOCK PUMP
F1200 – VERTICAL CENTRIFUGAL PUMPS
- F11201 – TURBINE – VERTICAL MOTOR WITH TURBINE IMPELLER FOR WET PITS.
- F11203 – VERTICAL SUMP PUMP – TURBINE IMPELLER
F1300 – INLINE CENTRIFUGAL PUMPS
- F1301 – API 610 IN LINE PUMP
- F1302 – GENERAL SERVICE IN-LINE PUMP
F1400 – GEAR PUMPS
- F1401 – STANDARD EXTERNAL GEAR ROTARY PUMP.
- F1402 – CANNED ROTOR GEAR PUMP.
- F1403 – MECHANICAL SEAL GEAR PUMP.
- F1404 – MAGNETIC DRIVE GEAR PUMPS FOR CRUCIAL LIQUID
F1500 – PISTON, OTHER POSITIVE DISPLACEMENT PUMPS
- F1501 – RECIPROCATING SIMPLEX PLUNGER PUMP STEAM DRIVER.
- F1502 – RECIPROCATING DUPLEX PLUNGER PUMP STEAM DRIVER.
- F1503 – RECIPROCATING TRIPLEX PLUNGER PUMP STEAM DRIVER.
- F1504 – DIAPHRAGM PUMP – TFE TYPE INCLUDES MOTOR DRIVER
- F1505 – RECIPROCATING PLUNGER PUMP INCLUDES MOTOR DRIVER.
- F1506 – HIGH DENSITY STOCK PUMP WITH TWIN INTERMESHING SCREW
F1600 – VACUUM PUMPS
- F1601 – HIGH VACUUM PUMPS
- F1602 – TWO-STAGE MECHANICAL VACUUM PUMPS
- F1603 – MULTI-STAGE MECHANICAL BOOSTER VACUUM PUMPS
- F1604 – VACUUM BOOSTER PUMPS
- F1605 – HOT VACUUM PUMPS
- F1606 – ROTARY VANE VACUUM PUMPS
- F1607 – VACUUM PUMP ACCESSORIES
F1700 – AXIAL FLOW PUMPS
- F1701 – AXIAL FLOW VERTICAL PUMPS
- F1702 – AXIAL FLOW HORIZONTAL PUMPS
- H1100 – SMALL / MEDIUM SCALE GENERATOR SETS COST CURVE
- H1200 – LARGE SCALE DIESEL FUELED GENERATOR SETS – TURBOCHARGED AND AFTERCOOLED
- H1300 – LARGE SCALE GASEOUS FUELED GENERATOR SETS
- H1400 – INDUSTRIAL SPARK-IGNITED ENGINE
- H1500 -MICROPROCESSOR-BASED ELECTRONIC MODULAR CONTROL PANEL
PROCESS EQUIPMENT DATABASE
DATABASE PRICE
- ROTATING EQUIPMENT
- STATIC EQUIPMENT
- HEAT TRANSFER EQUIPMENT
- MATERIAL HANDLING EQUIPMENT
- MISCELANEOUS EQUIPMENT
RECOMMENDED DEAL
PREMIUM DATABASE MEMBERSHIP
All databases and applications includedDATABASE PRICE
- PROCESS EQUIPMENT
- PROCESS PIPING & PIPELINES
- CIVIL WORKS
- RENTAL EQUIPMENT RATES
- ELECTRICAL & INSTRUMENTATION
- OPEX / ABEX-DECAB DATABASE
- ENGINEERING – HOME OFFICE
- OIL & GAS DEVELOPMENT PROJECTS
- RENEWABLE ENERGY DEVELOPMENT PROJECTS
- PROJECT COST BENCHMARKING
- WORLDWIDE LOCATION FACTOR
- CAF- COST INDEXES
We’re ready to transform the way you Estimate your Project.
When we say all in one, we certainly strive that all the tools that a Cost Estimating Professional needs are integrated. The growth process of the Databases and Tools is done in accordance with the requirements of the users.
You can find the databases, tools and techniques to Estimate your Project, or we can tailor it to suit your needs.
These Databases were designed with the objective of providing information necessary to carry out cost estimates for Industrial Projects, based on generic cost curves for several types of equipment families, generated through benchmarking techniques and Multiple Regression Analysis.
The comparative curves simulate Component Cost as a function of a capacity variable or combination of variables. The cost curves, man hours of installation and other information contained in this application can be used to develop the total cost of capital (CAPEX) of a process plant or any construction infrastructure.
These databases are time & location adjustable online.
At your disposal cost index and location factor tools, you can adjust them using “Caf-Cost-Index” and “Caf-Capex Location Factor” online, do not waste time waiting for an updated edition, you will always have the information up to date.